How to Attach Solar Lights to Brick Walls

By Kami Turky

Last Updated:

There are different methods of installing solar lights on brick walls, and in this article, we will explore two popular options: using mounting hardware and double face mounting tape.

Additionally, we’ll provide some precautions to consider during the solar lights installation process and answer frequently asked questions.

Method 1: Installing Solar Lights Using Mounting Hardware

Step 1: Choose the Right Solar Light and Mounting Hardware

Before you begin, select a solar light that is suitable for your needs and comes with the appropriate mounting hardware. This will typically include screws, wall anchors, and brackets.

The best hanging solar lanterns come with mounting hardware specifically designed for brick walls to ensure a secure and lasting installation.

Step 2: Mark the Installation Points

Decide where you want to install your solar lights on the brick wall and use a pencil or chalk to mark the exact spots where the screws will go. Ensure the location is ideal for capturing sunlight and illuminating the desired area.

Related Article: How Far Apart Should You Place Your Solar Lights?

Step 3: Drill Pilot Holes

Use a power drill with a masonry bit to create pilot holes at the marked points. Make sure the holes are the correct size for the wall anchors provided with your mounting hardware.

Step 4: Insert Wall Anchors

Gently tap the wall anchors into the pilot holes using a hammer. Make sure they are flush with the brick surface.

Step 5: Attach the Brackets

Place the mounting brackets over the wall anchors and secure them using the provided screws. Tighten the screws until the brackets are firmly attached to the brick wall.

Step 6: Mount the Solar Lights

Attach the solar lights to the brackets according to the manufacturer’s instructions. Ensure the lights are securely fastened to the brackets to prevent them from falling.

Method 2: Using Double Face Mounting Tape

Step 1: Clean the Surface

Thoroughly clean the brick surface where you intend to attach the solar fence lighting. Use a brush or cloth to remove dirt and debris. For better adhesion, you may use rubbing alcohol to clean the surface.

Step 2: Apply the Double Face Mounting Tape

Cut a piece of heavy-duty double face mounting tape to fit the back of the solar light. Remove the backing paper and press the tape firmly onto the back of the solar light.

Step 3: Position the Solar Light

Carefully position the solar light on the brick wall, ensuring it’s level and at the desired location. Press the solar arena light firmly onto the arena wall and hold it in place for a few seconds to secure the bond.

Precautions When Installing Solar Lights on Brick Walls

  1. Always wear safety goggles and gloves while drilling or hammering to protect your eyes and hands from dust and debris.
  2. Use a ladder or step stool to reach higher installation points, and ensure it is stable before climbing.
  3. Turn off the solar light during installation to prevent accidental activation.
  4. Handle the lights with care during installation to avoid damage.

Related Article: How to Restore Broken Solar Lights?

FAQs

Can solar lights be attached to any brick wall?

Solar lights can be attached to most brick walls, provided the surface is clean and the mounting hardware is suitable for brick.

How can I ensure my solar light receives enough sunlight?

Choose a location with direct sunlight for at least 6-8 hours a day. Avoid shaded areas or spots that may be obstructed by trees or buildings.

Related Article: Why Do Solar Lights Need Direct Sunlight?

Can I install solar lights on a curved brick wall?

While it may be more challenging, it is possible to install solar lights on a curved brick wall using flexible mounting brackets or double face mounting tape designed for uneven surfaces.

Conclusion

Installing solar lights on a brick wall is a straightforward process. Just make sure to choose the right mounting hardware specifically designed for brick walls and to clean the surface thoroughly for proper adhesion.

By following these steps and precautions, your solar lights will last for years to come on this brick wall.

Kami Turky

Kami is a solar engineer with nearly a decade of experience in researching, testing, and reviewing various solar products.He has also provided technical consultation to several organizations on the best ways to incorporate solar energy into their operations.When he’s not busy helping others find the best solar solutions, Kami enjoys spending time outdoors, hiking, camping, and exploring the natural wonders of his home state.

Also Read

best solar motion sensor security lights

The 7 Best Solar Motion Sensor Security Lights

With all the solar motion sensor security lights out there, picking the right one can ...

Read more

are solar lights bright enough

Are Solar Lights Bright Enough?

The solar lights industry has dramatically evolved over the past few years and now we ...

Read more

How to Install Solar Lights

Do Solar Lights Need Direct Sunlight?

As household budgets tighten and energy prices soar, solar lights offer an attractive way to ...

Read more

best solar house numbers

The 10 Best Solar House Numbers

Navigating the vast sea of solar house numbers available today can feel like an overwhelming ...

Read more

Do Solar Lights Charge When Turned Off?

10 Easy Ways To Charge Solar Lights Without Sun

Solar light is meant to be charged by the sun. But what do you do ...

Read more

how do solar lights turn on automatically at night

How Do Solar Lights Turn on Automatically at Night?

Solar lights turn on automatically at night because they come equipped with photoresistors that work ...

Read more

Leave a Comment